SARAClean

Features and Benefits SARAClean is an amazingly effective and safe product used for cleaning many different surfaces. SARAClean is used to clean down silvered, dirty, mouldy and black timber surfaces in preparation for applying CD50® and other products, or as a general cleaning agent. SARAClean is extremely safe for the environment, for animals, humans and vegetation. It is non-flammable, non hazardous and biodegradable. SARAClean will not harm plants, rubber, glass, aluminium, paint or most common surfaces. It will remove dirt, grime, salt, mould and algae from decks, houses, and numerous other outdoor surfaces SARAClean is also used to clean painted surfaces prior to repainting, and for regular maintenance and painted surfaces. How To Prepare and Use SARAClean For best results: 100 grams of powder (1 Packet) / 10 litres of water. Dissolve a proportion of or entire contents of SARAClean into a container of clean water. Saturate the surface to be cleaned with the ‘made-up solution’. KEEP THE SURFACE WET FOR APPROXIMATELY 15-20 MINUTES THEN WASH OFF WITH WATER. For best results use high-pressure washing (60-80 bar pressure). Clean from the highest point and work down methodically allowing the water to cascade over the unwashed surface to keep it from drying out. CAUTION: When cleaning soft timber surfaces, reduce jet pressure to avoid scouring of sapwood. ALWAYS clean off with a soft ‘even fan-shaped water jet’ DO NOT use ‘turbo jets’ on timber or paint work. NOTE: If applying the made up solution through a water blast venturi system, ensure that SARA-Clean uptake concentration is increased to compensate sufficiently for added water dilution through the machine. For full details on how to use SARAClean, see the Technical Data Sheet.     Back to top

Before After SARAClean Washing

Before

After